联系我们:18660761567
尼龙托辊具有低的磨擦系数和高的抗粘附能力,可增加皮带使用寿命2-3倍!尼龙托辊具有阻燃性、防静电、耐老化,耐化学介质的腐蚀;尼龙托辊有不错的机械强度,抗反复冲击、震动能力强。
The nylon roller has a low friction coefficient and high anti-adhesion ability, which can increase the belt life by 2-3 times! The nylon roller has flame retardancy, anti-static, anti-aging and chemical medium corrosion resistance; the nylon roller has good mechanical strength and strong resistance to repeated shock and vibration.
耐疲劳性能突出,制件经多
次反复屈折仍能保持原有机械强
能抵御汽油、油、脂肪、
酒精、弱堿等的侵蚀和有
很好的抗老化能力。
耐高温80℃、低温-40℃
抗静电,抗阴燃,耐老化,耐化学
(酸、碱和有机溶剂)的腐蚀
具有优良的自润滑性,不用注
油,在恶劣条件下使用不易卡死
尼龙托辊具有高的耐磨性能,低的磨擦
系数,不易磨损皮带
尼龙托辊本身重量轻,只有金属件的三分之一,安装方便,维修率低噪音小,运转平稳,节能,可提高使用周期尼龙托辊防尘,防水性能好,在多扬灰环境中使用,不易进水。
轴承摩擦系数小,转速高,结构简单,制造成本低,精度高,不要需经常维护,而且尺寸范围大、形式多。它主要承受径向载荷,也可承受一定的轴向载荷。当其仅承受径向载荷时,接触角为零。
轴承座采用国标图纸尺寸及技术要求加工订制,并且采用精密数控机床对轴承座的外圆和背身进行加工,确保轴承座的偏摆度和垂直度符合要求,加工的托辊径向跳动小,同轴度高。
尼龙是聚酰胺纤维(锦纶)的一种说法,聚酰胺主要用于合成纤维,用途广,是以塑代钢、铁、铜等金属的好材料,是重要的工程塑料;铸型尼龙广泛代替机械设备的耐磨部件,代替铜和合金作设备的耐磨损件,节能环保。
密封件是防止流体或固体微粒从相邻结合面间泄漏以及防止外界杂质如灰尘与水分等侵入机器设备内部的零部件的材料或零件。 密封件的存放室温最好在30℃以下,避免密封件产生高温老化。
尼龙托辊使用环境温度范围为:-40℃~80℃。
尼龙托辊正常使用寿命30000h以上,一般不需维修。但根据使用场所和负荷的大小,应制定相应的维修日期,及时清洗注油维修,及时清理浮煤等。对有异常声响和不转的托辊要及时更换。
The normal service life of the roller is more than 30,000 hours, and generally no maintenance is required.Replace the rollers with abnormal sound and non-rotation in time.
尼龙托辊更换轴承时,必须使轴承保持架开口向外,轴承装入托辊后,应保持适当的游隙,不得压死。
When replacing the bearing, the bearing cage opening must be outward. After the bearing is loaded into the roller, the proper clearance should be maintained and must not be crushed.
正确的使用尼龙托辊在机械运输中有重要作用,维护工
作增加尼龙托辊使用寿命。
尼龙托辊中迷宫密封件应采用原厂配件,装配时应分别装入托辊内,不得套在一起装配。
The labyrinth seals in nylon rollers should be made of original parts. They should be loaded into the rollers separately during assembly and should not be assembled together.
尼龙托辊使用时,应严防重物击砸托辊管体。
When using the nylon roller, the heavy object should be prevented from hitting the roller body.
为确保尼龙托辊密封性能及使用性能,禁止随意拆卸托辊。
In order to ensure the sealing performance and performance of the nylon roller, it is forbidden to disassemble the roller at will.